Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 22 results ...
Ahmed, H I (2023) Mechanical Behavior, Microstructure, and Chloride-Penetration Resistance of Glass Waste Nanopowder Magnetic Concrete. Journal of Construction Engineering and Management, 149(01).
Amies, P, Jin, X and Senaratne, S (2023) Systematic Literature Review on Success Criteria for Dam Engineering Projects. Journal of Construction Engineering and Management, 149(01).
Barkokebas, B, Al-Hussein, M and Hamzeh, F (2023) Assessment of Digital Twins to Reassign Multiskilled Workers in Offsite Construction Based on Lean Thinking. Journal of Construction Engineering and Management, 149(01).
Hosseinian, S M and Tavakoli, M (2023) Markets, Hierarchies, or Hybrids as Alternative Governance Structures in Construction Contracts: Transaction Cost Economics Analysis. Journal of Construction Engineering and Management, 149(01).
Hu, F, Liao, R and Chen, J (2023) Calculation Methods to Optimize the Number of Pedestals and Evaluate Production Plans for Precast Yards Fabricating Prestressed Bridge Beams and Precast Segments for Poststressed Segmental Erection. Journal of Construction Engineering and Management, 149(01).
John, S T, Sarkar, P and Davis, R (2023) A Long-Range Wide-Area Network System for Monitoring Early-Age Concrete Compressive Strength. Journal of Construction Engineering and Management, 149(01).
Khalef, R and El-adaway, I H (2023) Identifying Design-Build Decision-Making Factors and Providing Future Research Guidelines: Social Network and Association Rule Analysis. Journal of Construction Engineering and Management, 149(01).
Lee, D, Wen, L, Choi, J O and Lee, S (2023) Sensor-Integrated Hybrid Blockchain System for Supply Chain Coordination in Volumetric Modular Construction. Journal of Construction Engineering and Management, 149(01).
Liang, R, Xue, Z and Chong, H (2023) Risk Evaluation of Logistics Park Projects’ Lifecycle during the COVID-19 Pandemic: Failure Mode and Effects Analysis. Journal of Construction Engineering and Management, 149(01).
Liu, T, Mao, Y and Lu, S (2023) Fostering Participants’ Collaborative Innovation Performance in Megaprojects: The Effects of Perceived Partners’ Non-Mediated Power. Journal of Construction Engineering and Management, 149(01).
Lohne, J, Klakegg, O J and Lædre, O (2023) Understanding the Potential for Criminal Activity in the Norwegian AEC Industry: A Building Process Perspective. Journal of Construction Engineering and Management, 149(01).
Mei, X, Zhou, X, Xu, F and Zhang, Z (2023) Human Intrusion Detection in Static Hazardous Areas at Construction Sites: Deep Learning–Based Method. Journal of Construction Engineering and Management, 149(01).
Murguia, D, Vasquez, C, Demian, P and Soetanto, R (2023) BIM Adoption among Contractors: A Longitudinal Study in Peru. Journal of Construction Engineering and Management, 149(01).
Okpala, I, Nnaji, C and Gambatese, J (2023) Assessment Tool for Human–Robot Interaction Safety Risks during Construction Operations. Journal of Construction Engineering and Management, 149(01).
Ryu, J, Banting, B, Abdel-Rahman, E and Haas, C T (2023) Ergonomic Characteristics of Expert Masons. Journal of Construction Engineering and Management, 149(01).
Suárez, J L, Gosselin, L and Lehoux, N (2023) Optimizing Modularity of Prefabricated Residential Plumbing Systems for Construction in Remote Communities. Journal of Construction Engineering and Management, 149(01).
- Type: Journal Article
- Keywords:
- ISBN/ISSN: 0733-9364
- URL: https://doi.org/10.1061/(ASCE)CO.1943-7862.0002393
- Abstract:
Prefabrication is often considered as a potential solution to address the challenges of building construction in remote communities. However, methods to find the best modularization for mechanical, electrical, and plumbing (MEP) systems are scarce. This prevents a proper assessment of cost reductions and local benefits, two key metrics for decision makers in remote communities. Therefore, in this study a computational framework is proposed for identifying the optimal modularity of piping to be assembled in residential buildings located in an isolated region, namely Nunavik (Quebec). The framework contributes to advancing existing modularity optimization approaches for MEP systems by integrating two objective functions, the impact of module characteristics on modularization, collision constraints during assembly, and the context of remote communities. The algorithm simultaneously minimizes system installation cost and maximizes local job creation, an important socioeconomical outcome of construction in remote areas. Fuzzy logic models and nondominated sorting genetic algorithm (NSGA-II) algorithm were used to evaluate configurations and identify nondominated solutions. Type of work, height of the assembly, direction changes, and stiffness of the modules were considered in estimating assembly time. The dimensions and weight of each module were used to estimate handling time. The optimization framework considers two possible prefabrication sites, outside and inside the remote region. By applying this approach to modularize an MEP system in typical Nunavik housing units, it was possible to demonstrate a reduction in installation cost and an increase in local job creation compared to the current situation (i.e., without MEP prefabrication). In particular, for a case study with 40 components, the proposed framework found a solution that can reduce installation cost by 81.9% and generate 23.4 h of local employment.
Wang, J, Zhang, S, Fenn, P, Luo, X, Liu, Y and Zhao, L (2023) Adopting BIM to Facilitate Dispute Management in the Construction Industry: A Conceptual Framework Development. Journal of Construction Engineering and Management, 149(01).
Wang, P, Wang, K, Huang, Y, Zhu, J, Fenn, P and Zhang, Y (2023) Payment Issues in China’s Construction Industry: Nature, Causes, and a Predictive Model. Journal of Construction Engineering and Management, 149(01).
Wang, T and Feng, J (2023) Optimal Review Strategy for Concurrent Execution of Design–Construction Tasks in DB Mode. Journal of Construction Engineering and Management, 149(01).
Yang, W, Zhang, F, Wang, H, Wu, J, Nie, Z and Li, L (2023) Synchronous Control Theory and First Test of Time-Varying Upper Operation and Chassis Attitude Maintenance for Truck Cranes. Journal of Construction Engineering and Management, 149(01).
Zeng, N, Liu, Y and König, M (2023) 4D BIM-Enabled Look-Ahead Scheduling for Early Warning of Off-Site Supply Chain Disruptions. Journal of Construction Engineering and Management, 149(01).
Zhang, X, Liu, T, Rahman, A and Zhou, L (2023) Blockchain Applications for Construction Contract Management: A Systematic Literature Review. Journal of Construction Engineering and Management, 149(01).